Foliant Pollux 760 SF

Year: 2015 Condition: good Configuration: * pallet loader * suction loading head * vibratory unloader - jogger

FOLIANT Pollux 760 SF is a high speed compact industrial laminating machine, a heavy duty construction machine with a suction

feeder and a high speed bump separator, with a walk-in service section and with an optional pallet feeder, a pallet stacker and an electric

film loader/manipulator. The machines maximum speed is up to 50 m/min., while the maximum performance is 3000 sheets per hour of

a B1 portrait or 6000 sheets per hour of B2 landscape (white paper 200 gsm).

FEEDER FOLIANT Pollux 760 SF is equipped with a rising pile back separation stream feeder, with a suction feed head. It is driven by an Omron

servo motor and controlled by a machine central PLC. The Becker vacuum pump is used for sheets back and sides airing. The overlaps are

electronically controlled, in an „in-run“ automatic mode, from the touch screen. The accuracy is +/- 2 mm under-lap (in a constant speed).

The standard feeder is fitted with a lifting plate and its capacity is a 55 cm pile of paper.

LAMINATOR FOLIANT Pollux 760 SF laminator maximum sheet size is 76 x 110 cm. The minimum sheet size is 30 x 25 cm (A4). FOLIANT Pollux 760

SF machine is a single sided thermal industrial laminator, laminating the paper 115 – 600 gsm, with an unique „U“ cross bar for the thin

sheets flat and safety high pressure lamination, mounted in the front of the main laminating rollers, with an „In run“ adjustable de-curl

bar.

The roll of a film is mounted on an air shaft that allows very convenient, easy and precise film positioning. The shaft capacity is up to 3000

m of the 24 - 31 microns film. The film holder unit is equipped with a trim slitter and a perforating wheel.

The laminating process is done between two laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller.

The laminating roller is heated with 6 contact electric heaters inside the roller, with a sensitive in-roll temperature sensor. The pressure is

pneumatically adjustable, with an extra independent control knob for each roller edge. The pressure of pulling rollers is controlled with a

pneumatic control knob. There is a service „walk-in“ section between the machine laminating rollers and pulling rollers for an easy

machine maintenance and rollers cleaning. The machine requires an external source of pressured air 200 l / min, 6 – 8 bars.The machine is fitted with OMRON Programmable Logic Controllers, which controls all machines’ functions. Used PLC system includes

many automatic items for an easy machine control and a reliable lamination. The whole machine is controlled by an interactive easy

understandable icon touch screen panel – no language version is needed.

SEPARATOR The integrated bump separator (sheeter) is equipped with a pair of fast cycling

rollers. The process is controlled from the machine PLC unit. The separated

sheets are delivered through a high speed belt conveyor (for safety loading to the

reception unit) into a vibrating jogger (optional) or a pallet stacker (optional).

LAMINATING FILMS The machine laminates the BOPP films (23 – 42 microns), Nylon films (max 35

microns) and PET films (max. 35 microns).

OPTIONS

JOGGER 760 (OPTIONAL)*

It is an adjustable vibrating reception unit for the laminated sheets stocking. Its

capacity is limited up to a 10 cm pile of sheets.

PALLET STACKER (OPTIONAL)*

It is a device equipped with a pallet trolley, pneumatically controlled from the

machine PLC, which loads the laminated sheets into a high pile. Its capacity is 65

cm pile of sheets. It is based on a manual scissors lift table (hydraulic) and sensors

for its pneumatic control. The pallet can be manipulated either from the

operator's side (it saves the manipulation space) or from behind.

PALLET FEEDER (OPTIONAL)

It is fitted with a pallet holder and an adaptor for a full pallet of paper. Its

capacity is a 65 cm paper pile. The pallet can be manipulated from the front and it

requires another space for the manipulation.

FILM LOADER/MANIPULATOR (OPTIONAL)

It is an electric lift with a film core adaptor for loading heavy rolls of film (max.

capacity 125 kg). The device is not integrated with the machine. It is only

connected with the machine s electric circuits